Skip to main content

Manage Data with TTL (Time-to-live)

Overview of TTL

TTL (time-to-live) refers to the capability of having rows or columns moved, deleted, or rolled up after a certain interval of time has passed. While the expression "time-to-live" sounds like it only applies to deleting old data, TTL has several use cases:

  • Removing old data: no surprise, you can delete rows or columns after a specified time interval
  • Moving data between disks: after a certain amount of time, you can move data between storage volumes - useful for deploying a hot/warm/cold architecture
  • Data rollup: rollup your older data into various useful aggregations and computations before deleting it
note

TTL can be applied to entire tables or specific columns.

TTL Syntax

The TTL clause can appear after a column definition and/or at the end of the table definition. Use the INTERVAL clause to define a length of time (which needs to be a Date or DateTime data type). For example, the following table has two columns with TTL clauses:

CREATE TABLE example1 (
timestamp DateTime,
x UInt32 TTL now() + INTERVAL 1 MONTH,
y String TTL timestamp + INTERVAL 1 DAY,
z String
)
ENGINE = MergeTree
ORDER BY tuple()
  • The x column has a time to live of 1 month from now
  • The y column has a time to live of 1 day from the timestamp column:
  • When the interval lapses, the column expires. ClickHouse replaces the column value with the default value of its data type. If all the column values in the data part expire, ClickHouse deletes this column from the data part in the filesystem.
note

TTL rules can be altered or deleted. See the Manipulations with Table TTL page for more details.

Triggering TTL Events

The deleting or aggregating of expired rows is not immediate - it only occurs during table merges. If you have a table that's not actively merging (for whatever reason), there are two settings that trigger TTL events:

  • merge_with_ttl_timeout: the minimum delay in seconds before repeating a merge with delete TTL. The default is 14400 seconds (4 hours).
  • merge_with_recompression_ttl_timeout: the minimum delay in seconds before repeating a merge with recompression TTL (rules that roll up data before deleting). Default value: 14400 seconds (4 hours).

So by default, your TTL rules will be applied to your table at least once every 4 hours. Just modify the settings above if you need your TTL rules applied more frequently.

note

Not a great solution (or one that we recommend you use frequently), but you can also force a merge using OPTIMIZE:

OPTIMIZE TABLE example1 FINAL

OPTIMIZE initializes an unscheduled merge of the parts of your table, and FINAL forces a reoptimization if your table is already a single part.

Removing Rows

To remove entire rows from a table after a certain amount of time, define the TTL rule at the table level:

CREATE TABLE customers (
timestamp DateTime,
name String,
balance Int32,
address String
)
ENGINE = MergeTree
ORDER BY timestamp
TTL timestamp + INTERVAL 12 HOUR

Removing Columns

Instead of deleting the entire row, suppose you want just the balance and address columns to expire. Let's modify the customers table and add a TTL for both columns to be 2 hours:

ALTER TABLE customers
MODIFY COLUMN balance Int32 TTL timestamp + INTERVAL 2 HOUR,
MODIFY COLUMN address String TTL timestamp + INTERVAL 2 HOUR

Implementing a Rollup

Suppose we want to delete rows after a certain amount of time but hang on to some of the data for reporting purposes. We don't want all the details - just a few aggregated results of historical data. This can be implemented by adding a GROUP BY clause to your TTL expression, along with some columns in your table to store the aggregated results.

Suppose in the following hits table we want to delete old rows, but hang on to the sum and maximum of the hits columns before removing the rows. We will need a field to store those values in, and we will need to add a GROUP BY clause to the TTL clause that rolls up the sum and maximum:

CREATE TABLE hits (
timestamp DateTime,
id String,
hits Int32,
max_hits Int32 DEFAULT hits,
sum_hits Int64 DEFAULT hits
)
ENGINE = MergeTree
PRIMARY KEY (id, toStartOfDay(timestamp), timestamp)
TTL timestamp + INTERVAL 1 DAY
GROUP BY id, toStartOfDay(timestamp)
SET
max_hits = max(max_hits),
sum_hits = sum(sum_hits);

Some notes on the hits table:

  • The GROUP BY columns in the TTL clause must be a prefix of the PRIMARY KEY, and we want to group our results by the start of the day. Therefore, toStartOfDay(timestamp) was added to the primary key
  • We added two fields to store the aggregated results: max_hits and sum_hits
  • Setting the default value of max_hits and sum_hits to hits is necessary for our logic to work, based on how the SET clause is defined

Implementing a hot/warm/cold architecture

note

If you are using ClickHouse Cloud, the steps in the lesson are not applicable. You do not need to worry about moving old data around in ClickHouse Cloud.

A common practice when working with large amounts of data is to move that data around as it gets older. Here are the steps for implementing a hot/warm/cold architecture in ClickHouse using the TO DISK and TO VOLUME clauses of the TTL command. (By the way, it doesn't have to be a hot and cold thing - you can use TTL to move data around for whatever use case you have.)

  1. The TO DISK and TO VOLUME options refer to the names of disks or volumes defined in your ClickHouse configuration files. Create a new file named my_system.xml (or any file name) that defines your disks, then define volumes that use your disks. Place the XML file in /etc/clickhouse-server/config.d/ to have the configuration applied to your system:
<clickhouse>
<storage_configuration>
<disks>
<default>
</default>
<hot_disk>
<path>./hot/</path>
</hot_disk>
<warm_disk>
<path>./warm/</path>
</warm_disk>
<cold_disk>
<path>./cold/</path>
</cold_disk>
</disks>
<policies>
<default>
<volumes>
<default>
<disk>default</disk>
</default>
<hot_volume>
<disk>hot_disk</disk>
</hot_volume>
<warm_volume>
<disk>warm_disk</disk>
</warm_volume>
<cold_volume>
<disk>cold_disk</disk>
</cold_volume>
</volumes>
</default>
</policies>
</storage_configuration>
</clickhouse>
  1. The configuration above refers to three disks that point to folders that ClickHouse can read from and write to. Volumes can contain one or more disks - we defined a volume for each of the three disks. Let's view the disks:
SELECT name, path, free_space, total_space
FROM system.disks
┌─name────────┬─path───────────┬───free_space─┬──total_space─┐
│ cold_disk │ ./data/cold/ │ 179143311360 │ 494384795648 │
│ default │ ./ │ 179143311360 │ 494384795648 │
│ hot_disk │ ./data/hot/ │ 179143311360 │ 494384795648 │
│ warm_disk │ ./data/warm/ │ 179143311360 │ 494384795648 │
└─────────────┴────────────────┴──────────────┴──────────────┘
  1. And…let's verify the volumes:
SELECT
volume_name,
disks
FROM system.storage_policies
┌─volume_name─┬─disks─────────┐
│ default │ ['default'] │
│ hot_volume │ ['hot_disk'] │
│ warm_volume │ ['warm_disk'] │
│ cold_volume │ ['cold_disk'] │
└─────────────┴───────────────┘
  1. Now we will add a TTL rule that moves the data between the hot, warm and cold volumes:
ALTER TABLE my_table
MODIFY TTL
trade_date TO VOLUME 'hot_volume',
trade_date + INTERVAL 2 YEAR TO VOLUME 'warm_volume',
trade_date + INTERVAL 4 YEAR TO VOLUME 'cold_volume';
  1. The new TTL rule should materialize, but you can force it to make sure:
ALTER TABLE my_table
MATERIALIZE TTL
  1. Verify your data has moved to its expected disks using the system.parts table:
Using the system.parts table, view which disks the parts are on for the crypto_prices table:

SELECT
name,
disk_name
FROM system.parts
WHERE (table = 'my_table') AND (active = 1)

The response will look like:

┌─name────────┬─disk_name─┐
│ all_1_3_1_5 │ warm_disk │
│ all_2_2_0 │ hot_disk │
└─────────────┴───────────┘